IP : - Your Status: Unprotected

Windows 7

Setup L2TP VPN in Windows 7





Open the Start Menu

First, click on the Start Menu and type “VPN” into the search box.



Click on the “Set up a virtual private network (VPN) connection.”


Enter the server information

Now, enter the server information as below.




In the text box labelled “Internet address” type VPN server host name: ocl2uk.spidervpnservers.com or ocl2usa.spidervpnservers.com or ocl2nl.spidervpnservers.com or ocl2can.spidervpnservers.com


In the text box labelled “Destination name” type "SpiderVPN” or whatever you want. This is the name of the connection, and will show up in the “Connect to a network” screen when we’re done.


Lastly, make sure that the checkbox labelled “Don’t connect now; just set it up so I can connect later” is checked.


Then click the “Next” button.





Enter your SpiderVPN username and password

In this screen, enter your VPN username and password.




In the text box labelled “User name:”, enter username.


In the text box labelled “Password:”, enter your password.


These can be found at https://spidervpn.org/clientarea/clientarea.php?action=services just click on any Active package


Optionally, check the “Remember this password” checkbox and you won’t have to enter your password when you connect to SpiderVPN.


Then, click the “Create” button.


Go to the connection

Click on the Start Menu, type the word “Network” into the search box, and click on “Network and Sharing Center”.





When the Network and Sharing Center opens, click on “Connect to a network”.




When you click on “Connect to a network”, a list of VPNs pops up. 


Right click on the “Spider VPN” or (the VPN connection just created) and choose “Properties”.


Edit the VPN type to L2TP

In the “Properties” of new VPN connection, click on the “Type of VPN” pop up menu and select “L2TP/IPsec”.

IMPORTANT; Make sure you Allow these




Next, click on the “Advanced Settings” button.


Set the Preshared Key

In the “IPsec Settings” dialogue, click the radio button labelled “Use preshared key for authentication”. Then type “private” into the textbox labelled “Key”. Then click the “OK” button.





Networking settings

This screen shows you the network settings. You may have different items in your list. In the list of items that you see, make sure that only the “Internet Protocol Version 4(TCP/IPv4)” and “Client for Microsoft Networks” items are checked. 

Finally, uncheck Internet Protocol Version 6(TCP/IPv6)


SpiderVPN currently does not route anything except TCP/IP version 4.



You’re now done with your setup! You’ve set up your SpiderVPN connection to use L2TP. Click “OK” to finish now, then connect to our VPN server by this connection.

Are you ready?
create an account, or contact us.